ciaooo a tutti ho reinstallato rtorrent sul mio synology 107+ dopo aver aggiornato il firmware con il beta appena uscito. Tutto ok ma ora, in basso nella scermata di rtorrent in ssh (ho installato solo rtorrent e non wtorrent), mi compare il seguente errore:
appena lo lancio questo:
(18:12:13) Using 'select' based polling.
(18:12:13) Deprecated on_* commands, use 'system.method.set_key = event.download.{inserted, erased, ...}, , ' instead.
e poi questo:
(18:13:13) Scheduled command failed: ratio: Command "stop_on_ratio" does not exist.
il mio file .rtorrent.rc è così:
# Numero di a cui connettersi per ogni torrent in download
min_peers = 40
max_peers = 1000
# Numero di nodi a cui connetersi per ogni torrent completato
# (-1 = stesso valore impostato per i torrent in download)
min_peers_seed = 10
max_peers_seed = 50
# Numero massimo di Upload simutanei
max_uploads = 5
# soglia di download e upload massimo. 0 per nessun limite
download_rate = 200
upload_rate = 30
#Directory per il salvataggio dei file scaricati
directory = /volume1/video/tmp/
# intervallo di porte per la connessione
port_range = 6891-6891
# Possibilità di usare porte radom nell'intervallo specificato
port_random = yes
# Permetti l'uso di traker udp
use_udp_trackers = yes
#posto dove sono i flie punto torrent
schedule = watch_directory,5,5,load_start=/volume1/public/*.torrent
schedule = untied_directory,5,5,stop_untied=
schedule = ratio,60,60,"stop_on_ratio=200"
# quando finisce il download trasferisci i file nella cartella Video
on_finished = move_complete,"execute=mv,$d.get_base_path=,/volume1/video/ ; d.set_directory=/volume1/video/"
# dht: auto | off
dht = auto
# porta udp per il dht
dht_port = 6891
#peer_exchange = yes
peer_exchange = yes
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
# encryption = allow_incoming,enable_retry,prefer_plaintext
encryption = allow_incoming,try_outgoing
Dove sbaglio?? se qualcuno mi aiuta mi farebbe un gran regalo!!! io non ci capisco nulla!!!
ciaooo e grazie anticipatamente!!!!
Errore rtorrent: Scheduled command failed: ratio: Command "stop_on_ratio" does not exist.
Errore rtorrent: Scheduled command failed: ratio: Command "stop_on_ratio" does not exist.
Non so se a qualcuno è capitato lo stesso errore cmq girovagando in internet ho letto che il nuovo rtorrent (8.4) necessita, per il ratio ecc.., nuove stringhe al file di configurazione e che sarebbero queste:
# Enable the default ratio group.
ratio.enable=
# Change the limits, the defaults should be sufficient.
ratio.min.set=150
ratio.max.set=300
ratio.upload.set=25M
# Changing the command triggered when the ratio is reached.
system.method.set = group.seeding.ratio.command, d.close=, d.erase=
io le ho messe così e l'errore che mi dava sembra risolto...
ciaooo a tutti
# Enable the default ratio group.
ratio.enable=
# Change the limits, the defaults should be sufficient.
ratio.min.set=150
ratio.max.set=300
ratio.upload.set=25M
# Changing the command triggered when the ratio is reached.
system.method.set = group.seeding.ratio.command, d.close=, d.erase=
io le ho messe così e l'errore che mi dava sembra risolto...
ciaooo a tutti
Synology DS 114 DSM 6