Disco EARS e LCC

Modelli: DS210j, DS210+, DS410j, DS410, DS710+, DS1010+, RS810(RP)+, [RX410, RX510]
Rispondi
bubunet
Utente
Utente
Messaggi: 294
Iscritto il: sabato 18 aprile 2009, 22:06

Disco EARS e LCC

Messaggio da bubunet »

ho montato questa mattina un disco Western Digital ears da 1tb sul ds110j ed in poco tempo LLc è arrivato a 119. E' normale o mi conviene utilizzare l'utility Western Digital WDIDLE3 per disabilitare l'LLC?
Loggandomi usando Putty, ho provato a verificare se per formattare gli HD (comando fdisk -lu) aveva usato l'Advanced format technology.
Questo è l'outup del comando, secondo voi il disco è formattato con Advanced format technology?

DiskStation> fdisk -lu

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes

Device Boot Start End Blocks Id System
/dev/sda1 256 4980735 2490240 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 4980736 9175039 2097152 82 Linux swap
Partition 2 does not end on cylinder boundary.
/dev/sda3 9437184 1953520064 972041440+ 83 Linux
DiskStation> DiskStation> fdisk -lu
1 DS-209j 2 HD WD 1Tb (WD10EARS) raid1
1 DS-211 2 HD WD 2Tb (WD20EARS) raid1
1 DS-414slim 4 HD WD 750Gb (WD7500BFCX) raid5
1 DS-1515+ 2 HD WD 1Tb (WD10EARS) raid1
1 DS-115j 1 HD WD 1Tb (WD10EFRX)
1 DS-218+ 2 HD IronWolf 3Tb (ST3000VN007) raid1
1 DS-1618+ 5 HD WD 3Tb (WD30EFRX) raid5
Rispondi

Torna a “Synology serie X10”