nuova patch per l'ibernazione

hom75
Utente
Utente
Messaggi: 16
Iscritto il: domenica 12 agosto 2012, 16:24

nuova patch per l'ibernazione

Messaggio da hom75 »

Salve,
a passetti sto cercando di risolvere il problema di ibernazione sul mio nas 212, prima avevo un UPs collegato e dava degli errori quindi l'ho staccato, poi dava errori sul gatway non trovato e ho risolto con l'impostazione manuale del route verso l'indirizzo ip relativo,

(eliminazione del ip impostato nell'interfaccia web e via ssh : ip route add default via ipgatway)

dopo è andato in hibernazione per una 10 di minuti poi è partito un rysinc col mio pc e da ieri sera continua a dire che va in ibernazione e poi si risveglia ma ora non capisco perchè (tentativi di accesso esterni, componenti di rete tipo router che sondano gli ip ...??)

i log dati dopo il wake up.... qualcuno ne sa nulla?

[SPOILER]Oct 11 06:53:16 scemd: SCEMD: disk 1 wake up from hibernation
Oct 11 06:53:17 scemd: SCEMD: disk 2 wake up from hibernation
Oct 11 07:23:38 scemd: SCEMD: disk 1 wake up from hibernation
Oct 11 07:23:44 scemd: SCEMD: disk 2 wake up from hibernation
Oct 11 07:37:16 kernel: [119377.610000] ata2: wake up from deepsleep, reset link now
Oct 11 07:37:16 kernel: [119377.650000] ata2: device plugged sstatus 0x113
Oct 11 07:37:16 kernel: [119380.620000] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Oct 11 07:37:16 kernel: [119380.630000] ata2: edma_err_cause=00000010 pp_flags=00000000, dev connect
Oct 11 07:37:16 kernel: [119380.630000] ata2: SError: { PHYRdyChg DevExch }
Oct 11 07:37:25 kernel: [119386.000000] ata1: wake up from deepsleep, reset link now
Oct 11 07:37:25 kernel: [119386.090000] ata1: device plugged sstatus 0x123
Oct 11 07:37:25 kernel: [119389.010000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Oct 11 07:37:25 kernel: [119389.020000] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect
Oct 11 07:37:25 kernel: [119389.020000] ata1: SError: { PHYRdyChg DevExch }
Oct 11 07:37:31 kernel: [119395.030000] ata1: link is slow to respond, please be patient (ready=0)
Oct 11 08:39:45 kernel: [123126.580000] ata1: wake up from deepsleep, reset link now
Oct 11 08:39:45 kernel: [123126.670000] ata1: device plugged sstatus 0x123
Oct 11 08:39:45 kernel: [123129.590000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Oct 11 08:39:45 kernel: [123129.600000] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect
Oct 11 08:39:45 kernel: [123129.600000] ata1: SError: { PHYRdyChg DevExch }
Oct 11 08:39:52 kernel: [123133.610000] ata2: wake up from deepsleep, reset link now
Oct 11 08:39:52 kernel: [123133.650000] ata2: device plugged sstatus 0x113
Oct 11 08:39:52 kernel: [123136.620000] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Oct 11 08:39:52 kernel: [123136.630000] ata2: edma_err_cause=00000010 pp_flags=00000000, dev connect
Oct 11 08:39:52 kernel: [123136.630000] ata2: SError: { PHYRdyChg DevExch }
Oct 11 08:39:58 kernel: [123142.650000] ata2: link is slow to respond, please be patient (ready=0)
Oct 11 09:02:40 kernel: [124500.760000] ata1: wake up from deepsleep, reset link now
Oct 11 09:02:40 kernel: [124500.830000] ata1: device plugged sstatus 0x123
Oct 11 09:02:40 kernel: [124503.770000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Oct 11 09:02:40 kernel: [124503.780000] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect
Oct 11 09:02:40 kernel: [124503.780000] ata1: SError: { PHYRdyChg DevExch }
Oct 11 09:02:48 kernel: [124509.000000] ata2: wake up from deepsleep, reset link now
Oct 11 09:02:48 kernel: [124509.040000] ata2: device plugged sstatus 0x113
Oct 11 09:02:48 kernel: [124512.010000] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Oct 11 09:02:48 kernel: [124512.020000] ata2: edma_err_cause=00000010 pp_flags=00000000, dev connect
Oct 11 09:02:48 kernel: [124512.020000] ata2: SError: { PHYRdyChg DevExch }
Oct 11 09:02:50 kernel: [124513.830000] ata1: SRST failed (errno=-16)
Oct 11 09:02:50 kernel: [124513.830000] ata1: SRST fail, set srst fail flag
Oct 11 09:02:51 kernel: [124514.750000] ata1: link reset sucessfully clear error flags
Oct 11 09:02:57 kernel: [124518.030000] ata2: link is slow to respond, please be patient (ready=0)
Oct 11 09:14:54 kernel: [125235.040000] ata1: wake up from deepsleep, reset link now
Oct 11 09:14:54 kernel: [125235.130000] ata1: device plugged sstatus 0x123
Oct 11 09:14:54 kernel: [125238.050000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Oct 11 09:14:54 kernel: [125238.060000] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect
Oct 11 09:14:54 kernel: [125238.070000] ata1: SError: { PHYRdyChg DevExch }
Oct 11 09:15:03 kernel: [125244.000000] ata2: wake up from deepsleep, reset link now
Oct 11 09:15:03 kernel: [125244.040000] ata2: device plugged sstatus 0x113
Oct 11 09:15:03 kernel: [125247.010000] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
Oct 11 09:15:03 kernel: [125247.020000] ata2: edma_err_cause=00000010 pp_flags=00000000, dev connect
Oct 11 09:15:03 kernel: [125247.020000] ata2: SError: { PHYRdyChg DevExch }
Oct 11 09:15:04 kernel: [125248.110000] ata1: SRST failed (errno=-16)
Oct 11 09:15:04 kernel: [125248.110000] ata1: SRST fail, set srst fail flag
Oct 11 09:15:05 kernel: [125249.330000] ata1: link reset sucessfully clear error flags
Oct 11 09:15:12 kernel: [125253.020000] ata2: link is slow to respond, please be patient (ready=0)
Oct 11 09:26:24 scemd: SCEMD: disk 1 wake up from hibernation
Oct 11 09:26:29 scemd: SCEMD: disk 2 wake up from hibernation
[/SPOILER]
Beren
Utente
Utente
Messaggi: 4
Iscritto il: mercoledì 24 ottobre 2012, 9:51

nuova patch per l'ibernazione

Messaggio da Beren »

scusate la domanda banale, come visualizzo il log di sistema per capire cosa risveglia il mio nas?
Rispondi

Torna a “DSM4.1”