Led arancio lampeggiante

Richieste varie sui NAS Server Synology
Rispondi
Adrianozzo
Utente
Utente
Messaggi: 3
Iscritto il: mercoledì 11 marzo 2020, 16:24

Led arancio lampeggiante

Messaggio da Adrianozzo »

Ciao a tutti,
Ho una ds1618+ da due mesi. Ieri durante un trasferimento file, che ho notato più difficoltoso del solito pur avendo fibra, il nas è risultato disconnesso alla rete. Da quel momento non è stato più trovabile in rete e all’accensione ottengo il led giallo lampeggiante, anche dopo un tentativo di reset. La sezione supporto del sito mi dà una serie di errori possibili non molto rassicuranti. Escludo che ci sia un problema di connessione o agli hard disk che sono 2 e il loro led risulta acceso. Che mi consigliate? I miei dati sono in pericolo, considerando che i due hd sono in shr1 con ridondanza perfetta?
burghy86
Moderatore
Moderatore
Messaggi: 11358
Iscritto il: martedì 11 settembre 2012, 18:59

Re: Led arancio lampeggiante

Messaggio da burghy86 »

Se hai un backup i tuoi dati sono al sicuro.

La procedura di reset che esiti ha dato? Il bip lo ha fatto?
NUOVO CANALE DISCORD
PARTECIPATE NUMEROSI:

https://discord.gg/McP3d4m2pG



Passare dalla sezione presentazioni e leggere il regolamento firma obbligatorio

siamo una community, aiutateci a sentirci parte di qualcosa e non un helpdesk
Non do aiuto in privato ma sul forum a tutti!!
Un grazie ci spinge a lavorare meglio
------------------------------------------------------------
  • UPS: apc
  • GTW: fritzbox o TP-LINK TD-W8970 ISP: [ADSL] intred(20000/1024/0) IP:[pubblico]
  • SWC: hp gigabit 8 porte with poe
  • NAS: ds213, ds213j, ds415+ 720+ dmv dal 6.2 alla 7. qnap ts212p ts22, all hd con wdred/ironwolf da 2/6tb
  • CLI: win 10, win11 e ubuntu
    [altro]
  • 3 smartphone android, lettore bd with allshare samsung, vodafone tv, raspberry p2 e p3
Adrianozzo
Utente
Utente
Messaggi: 3
Iscritto il: mercoledì 11 marzo 2020, 16:24

Re: Led arancio lampeggiante

Messaggio da Adrianozzo »

Sì ha fatto beep.
Questa la risposta dell'assistenza:
In order to check whether the NAS does present a hardware failure, and possibly on the motherboard (considering the symptoms you described) could you proceed to the following test:

Remove all disks in the NAS and then try to start it (so without disks).
Could you also install our software synology assistant to check if it can see the NAS with or without the disks?

https://global.download.synology.com/do ... -23733.exe

If some optionnal ram module or card expansion have been added too could you try to take them out and restart the NAS without them?

If the NAS starts correctly, i.e. the blue LED stabilizes and you hear a beep, it will mean that the motherboard is functional, in which case the issue will be linked to the HDDs, which you will have check using the manufacturer's tools:

[Seagate / Samsung HDD: Seatool]
http://www.seagate.com/www/en-us/suppor ... /seatools/

On the other hand, if the NAS does not start properly, i.e. the blue LED flashes indefinitely and no beep is heard, then this will mean that the motherboard is faulty. In such case, it will be necessary to replace the NAS. In that case we're sending you a demand for a document in order to give you the proper procedure to follow.

Thank you in advance for your feedback

Best regards

Jérémie Amsler

Technical Support
Non sono stati aggiunti moduli di ram. Ho riavviato senza dischi e pur essendoci il beep il Nas comunque non viene rilevato in rete.
burghy86
Moderatore
Moderatore
Messaggi: 11358
Iscritto il: martedì 11 settembre 2012, 18:59

Re: Led arancio lampeggiante

Messaggio da burghy86 »

Ma sul router non lo vedi collegato?
NUOVO CANALE DISCORD
PARTECIPATE NUMEROSI:

https://discord.gg/McP3d4m2pG



Passare dalla sezione presentazioni e leggere il regolamento firma obbligatorio

siamo una community, aiutateci a sentirci parte di qualcosa e non un helpdesk
Non do aiuto in privato ma sul forum a tutti!!
Un grazie ci spinge a lavorare meglio
------------------------------------------------------------
  • UPS: apc
  • GTW: fritzbox o TP-LINK TD-W8970 ISP: [ADSL] intred(20000/1024/0) IP:[pubblico]
  • SWC: hp gigabit 8 porte with poe
  • NAS: ds213, ds213j, ds415+ 720+ dmv dal 6.2 alla 7. qnap ts212p ts22, all hd con wdred/ironwolf da 2/6tb
  • CLI: win 10, win11 e ubuntu
    [altro]
  • 3 smartphone android, lettore bd with allshare samsung, vodafone tv, raspberry p2 e p3
Rispondi

Torna a “DOMANDE GENERICHE”